Broan AWEPD48SS Guide d'installation télécharger pdf

FOLLOW HOOD INSTALLATION GUIDE STEPS 1 TO 3

PRIOR TO WALL EXTENSION INSTALLATION.



Measure and mark a

level line on wall above

cooktop location for the

wood mounting strip.

Remove wood

mounting strip from

back of hood.

Center wood mounting

strip over location.

Use no. 10 x 2’’ flat

head screws to secure

the mounting strip to

the wall.

Make sure to hit the

wall studs.

 Insert house wiring through top, right hole.

 Rest the back cavity of the wall extension on wood mounting

strip (provided with the hood). Secure upper portion of the wall

extension to wood mounting strip with (up to) 6 no. 8 x 5/8”

screws (included).

Drill two 3/16” diameter holes into the wall for wall anchors

through two of the existing lower holes of the wall extension.

Then, install both wall anchors, both washers and 2 no. 8 x 5/8”

screws (included).

WALL EXTENSION AWEPD SERIES

INSTALLATION INSTRUCTIONS

THIS KIT CONTAINS:

• 1 W

ALL EXTENSION

• 1 PARTS BAG (SERVICE PART NO. S97018867) INCLUDING: 1 WIRE

CLAMP, 8 NO. 8 X 5/8" SCREWS, 2 WALL ANCHORS, 2 WASHERS AND

8 NO. 10-32 X 3/8" SCREWS

Due to the weight of this hood, ensure that the wood strip is

attached to all of the available studs (2 studs minimum for

36" width hood and 3 studs minimum for 48" width hood);

not into the wall alone.

CAUTION

HD0478A

1. Wall

2. Wood mounting

strip

3. Flat head screw

4. Wall anchor location

5. Back of wall

extension outline

6. Wall studs

HD0475

4 TO 6 SCREWS

2 WALL ANCHORS/WASHERS/SCREWS

 Using pliers, unfold to 90° both wall extension metal tabs to

align hood during installation.

FOLLOW HOOD INSTALLATION GUIDE STEPS 4 TO 6

BEFORE INSTALLING HOOD.

HR0071

90°

 Remove the hood

electrical compartment

and insert house wiring

through hood wire

clamp.

Rest the back cavity of

the hood on wall

extension metal tabs.

Secure hood to wall

extension using 8

provided no. 10-32 x

1/2” quadrex screws (4

on both sides). See

illustration at right.

Tighten wire clamp.

SCREW

LOCATIONS

TAB

FOLLOW HOOD INSTALLATION GUIDE STEPS 9 TO 11 TO

FINALIZE HOOD INSTALLATION

1 2 3 4

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

FOLLOW HOOD INSTALLATION GUIDE STEPS 1 TO 3PRIOR TO WALL EXTENSION INSTALLATION.Measure and mark alevel line on wall abovecooktop location for thewoo

Page 2 - DIRECTIVES D’INSTALLATION

DIRECTIVES D’INSTALLATIONDE LA RALLONGE DE HOTTEDE LA SÉRIEAWEPDCET ENSEMBLE CONTIENT :• 1 RALLONGE DE HOTTE• 1 SAC DE PIÈCES (PIÈCE DE SERVICE N° S97

Page 3 - DE SERIE

SIGA LOS PASOS 1 A 3 DE LA GUÍA DE INSTALACIÓN DE LACAMPANA ANTES DE INSTALAR LA EXTENSIÓN DE PARED. Mida y marque sobre lapared una línea a nivelpor

Page 4 - 99044961C

BROAN-NUTONE ONE YEAR LIMITED WARRANTYBroan-NuTone warrants to the original consumer purchaser of its products that such products will be free from de

Commentaires sur ces manuels

Pas de commentaire

Broan AWEPD48SS Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Broan AWEPD48SS. Broan AWEPD48SS Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Broan AWEPD48SS