Broan EPLEC130SS Manuel d'utilisateur télécharger pdf (Page 11)

INSTALLATION MANUAL

INSTALLATION

NON-DUCTED INSTALLATION ONLY

10 ] Remove the 3 screws retaining the recirculation cover plate to the hood. Discard this plate

with its screws.

11 ] Peel off and discard the membrane covering the recirculation grille, ensuring the openings

are totally cleared.

8 ] Remove the EZ1 brackets from inside the hood by cutting off the tie wrap. Discard the tie

wrap.

9 ] Remove Electrical Power Cable Knockout from top (vertical exhaust) or back (horizontal

exhaust) of hood. For knockout removed from back of hood, install an appropriate strain

relief, 1/2” diameter (not included). For knockout removed from top of hood, the strain relief

will be installed later.

EZ1

BRACKETS

ELECTRICAL

POWER CABLE

KNOCKOUT

RECIRCULATION

COVER PLATE

SCREWS

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Pas de commentaire

Broan EPLEC130SS Manuel d'utilisateur Page 11