Broan E64E30SS Guide d'installation télécharger pdf (Page 9)

HD0269

LEFT SIDE MOUNTING

CREWS LOCATION

Using a 5/16" socket, remove all blower mounting

screws from the inner top of the hood. Keep the

screws for further use.

HD0282

RIGHT SIDE

MOUNTING SCREWS

LOCATION

6. CHOSE THE OPENING(S) (INTERNAL BLOWER HOODS ONLY)

Remove the knockout for the chosen opening(s) (horizontal at the back of the hood or vertical on top). See illustrations below.

VERTICAL DISCHARGE

HORIZONTAL DISCHARGE

NOTE: For ducted installation only.

Punch out the appropriate electrical knockout hole on top (A) or back (B) of

the hood. Install the wire clamp (included in parts bag).

NOTE: For a non-ducted installation, punch out the back electrical

knock-out (B).

2 3

HR0021

HR0024

7. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) ONLY)

All internal blower hoods are factory shipped with the blower(s) mounted for a vertical discharge configuration. For a horizontal discharge

configuration, disassemble the blower(s) from the inner top of the hood and mount it (them) to the back panel of the hood. The procedure

below applies for one or two motors.

Unplug the blower.

HE0085

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Pas de commentaire

Broan E64E30SS Guide d'installation Page 9