Broan 345GOWW Manuel d'utilisateur télécharger pdf (Page 3)

MODELS 345GOBK • 345GOWW

Page 3

6. Working from inside the attic, find the center of the

selected solar panel location identified in step 2, drill a

small hole in the roof decking large enough for the solar

panel wire to fit through.

7. Working from roof side, feed the solar panel wire through

the hole into the attic.

8. Run a bead of silicone or roof cement around the

perimeter of the underside of the solar panel and secure

to the roof using nails or screws. Nail or screw all corners

and perimeter of base every 6 inches. Seal the fastener

heads with silicone or roof cement.

9. From inside the attic, apply silicone around the wire

where it enters the roof.

10. Connect the red wire to the negative motor terminal and

the black wire to the positive motor terminal. Tape or tie

extra wire to prevent contact with the fan blade.

11. Remove cardboard from the solar panel and verify that

the ventilator operates.

REMOTE SOLAR PANEL

INSTALLATION

SERVICE PARTS

Replacement parts

can now be ordered

on our website.

Please visit us at

www.Broan.com

Model Model

Key 345GOBK 345GOWW Description

No. (Black) (Weathered Wood)

1 77001317 77001318 Solar Panel Assembly

2 CWT45 CWT45 Thermostat (Optional)

3 79310005 79310005 Fan Blade w/ Set Screw

4 79080082 79080082 Motor, DC

5 77001285 77001286 Roof Sheet Panel

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Broan 345GOWW Manuel d'utilisateur Page 3