Broan BPS1FA36 Guide d'installation télécharger pdf

Page 1

ALLURE™ QS1 SERIES

RANGE HOOD

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY

TO PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer. If

you have questions, contact the manufacturer at the address or

telephone number listed in the warranty.

2. Before servicing or cleaning unit, switch power off at service panel

and lock the service disconnecting means to prevent power from

being switched on accidentally. When the service disconnecting

means cannot be locked, securely fasten a prominent warning

device, such as a tag, to the service panel.

3. Installation work and electrical wiring must be done by a qualified

person(s) in accordance with all applicable codes and standards,

including fire-rated construction codes and standards.

4. Sufficient air is needed for proper combustion and exhausting of

gases through the flue (chimney) of fuel burning equipment to

prevent backdrafting. Follow the heating equipment manufacturer’s

guideline and safety standards such as those published by the

National Fire Protection Association (NFPA), and the American

Society of Heating, Refrigeration and Air Conditioning Engineers

(ASHRAE), and the local code authorities.

5. When cutting or drilling into wall or ceiling, do not damage electrical

wiring and other hidden utilities.

6. To reduce the risk of fire or electric shock, do not use this range

hood with an additional speed control device.

7. Ducted fans must always

be vented to

the outdoors.

8. To reduce the risk of fire, use only metal ductwork.

9. Use with approved cord-connection kit only.

10. This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Never leave surface units unattended at high settings. Boilovers

cause smoking and greasy spillovers that may ignite. Heat oils

slowly on low or medium settings.

2. Always turn hood ON when cooking at high heat or when cooking

flaming foods.

3. Clean ventilating fans frequently. Grease should not be allowed to

accumulate on fan or filter.

4. Use proper pan size. Always use cookware appropriate for the size

of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT

OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:*

1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal

tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS.

If the flames do not go out immediately, EVACUATE AND CALL

THE FIRE DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN — You may be burned.

3. DO NOT USE WATER, including wet dishcloths or towels - violent

steam explosion will result.

4. Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher and you already

know how to operate it.

B. The fire is small and contained in the area where it started.

C. The fire department is being called.

D. Yo u can fight the fire with your back to an

exit.

Based on “Kitchen Fire Safety Tips” published by NFPA.

ALLURE

™

QS1 SERIES RANGE HOODS

READ AND SAVE THESE INSTRUCTIONS

Installer: Leave this manual with

the homeowner.

Homeowner: Operating and

Cleaning information on page 5.

CAUTION

1. Fo r indoor use only.

2. For general ventilating use only. Do not use to exhaust hazardous

or explosive materials and vapors.

3. To avoid motor bearing damage and noisy and/or unbalanced

impellers, keep drywall spray, construction dust, etc. off power

unit.

4. For best capture of cooking impurities, your range hood should be

mounted so that the top of the hood is 24-30” above the cooking

surface.

5. Please read specification label on product for further information

and requirements.

TABLE OF CONTENTS

This manual is divided into sections as follows:

“PREPARE HOOD LOCATION”

Run ductwork from roof or wall cap, and electrical wiring from

service panel - to installation location

“PREPARE THE HOOD”

Get your hood ready for installation

“CONNECT WIRING”

Make electrical wiring connections to hood

“INSTALL HOOD”

Secure hood to cabinet and ductwork - install bulbs and filters

“OPERATION”

How to use the hood controls

“CLEANING”

Keep your hood in top working condition

“SERVICE PARTS”

Part numbers and exploded view of hood components

“WARRANTY”

One-year limited warranty and how to contact us

NOTE If hood is to be installed Non-Ducted:

Purchase a set of (2) non-ducted filters from your

local distributor or retailer and attach them to the

aluminum mesh filters.

Patent No.:

US D450, 829 S

FOR DOMESTIC COOKING ONLY.

1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - QS1 SERIES RANGE HOODS

Page 1ALLURE™ QS1 SERIESRANGE HOOD !WARNINGTO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:1. Use this uni

Page 2 - PREPARE THE HOOD

Page 10ALLURE™ QS1 SERIESRANGE HOOD CONEXIÓN ELÉCTRICA1 Haga la conexión eléctrica del suministro doméstico (120 VCA) en la campana. Si es nec

Page 3

Page 11ALLURE™ QS1 SERIESRANGE HOOD ADVERTENCIA: Para reducir el riesgo de una descarga eléctrica, desconecte el suministro eléctrico antes

Page 4 - CONNECT WIRING

Page 12ALLURE™ QS1 SERIESRANGE HOOD CAMPANA EXTRACTORASERIE QS1 ALLURE™Página 12626974DGARANTIA BROAN-NUTONE LIMITADA POR UN AÑOBroan-NuTone garant

Page 5 - NON-DUCTED FILTERS

Page 2ALLURE™ QS1 SERIESRANGE HOOD CABINETBOTTOMCABINET FRONTHORIZONTAL DUCTACCESS HOLE5¼"5¼"7½"1/8"¾"1315/16" (30&qu

Page 6 - SERVICE PARTS

Page 3ALLURE™ QS1 SERIESRANGE HOOD PREPARE THE HOOD3 Remove Damper/Duct Connector from inside the hood. Set connec-tor aside - with mounting screw

Page 7 - SERIE QS1 ALLURE

Page 4ALLURE™ QS1 SERIESRANGE HOOD CONNECT WIRINGWARNING: To reduce the risk of electric shock, make sure power is switched off at the service pane

Page 8 - PREPARACIÓN DEL LUGAR

Page 5ALLURE™ QS1 SERIESRANGE HOOD WARNING: To reduce the risk of electric shock, disconnect from power supply before cleaning.Aluminum mesh filter

Page 9

Page 6ALLURE™ QS1 SERIESRANGE HOOD WARRANTYBROAN-NUTONE ONE YEAR LIMITED WARRANTYBroan-NuTone warrants to the original consumer purchaser of its pr

Page 10 - PREPARACIÓN DE LA CAMPANA

Page 7ALLURE™ QS1 SERIESRANGE HOOD !ADVERTENCIAPARA REDUCIR EL RIESGO DE INCENDIO, CHOQUE ELECTRICO, O LESION A PERSONAS, PROCURE LO SIGUIENTE:1.

Page 11 - INSTALACIÓN DE LA CAMPANA

Page 8ALLURE™ QS1 SERIESRANGE HOOD 35,4 cm (campana de 76,2 cm)43,0 cm (campana de 91,4 cm)50,6 cm (campana de 106.7 cm)35,4 cm (campana de 76,2 cm

Page 12

Page 9ALLURE™ QS1 SERIESRANGE HOOD 3 Quite el conector del regulador de tiro/conector del interior de la cam-pana. Ponga aparte el conector, con l

Commentaires sur ces manuels

Pas de commentaire

Broan BPS1FA36 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Hottes de cuisine Broan BPS1FA36. Broan BPS1FA30 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Hottes de cuisine Broan BPS1FA36